Robot Wheel 7cm Diameter and 4cm Width
- Shaft Diameter – 6 mm
- Wheel Diameter – 70 mm
- Wheel Width – 40 mm
- Weight: 38gm/Wheel
SG90 Tower Pro Micro Servo Motor 9gm
- Operating Voltage: 3V to 7.2V
- Stall torque @4.8V: 1.2 kg-cm
- Stall torque @6.6V: 1.6 kg-cm
- Gear Type Plastic
- Weight of Motor 9gms
SIM800L Mini GSM GPRS Module
- Quad-band 850/900/1800/1900MHz
- GPRS multi-slot class12 connectivity: max. 85.6kbps(down-load/up-load)
- Controlled by AT Command (3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands)
- Supports Real-Time Clock
- Supply voltage range 3.4V ~ 4.4V
- Supports A-GPS
- Supports 3.0V to 5.0V logic level
- Low power consumption, 1mA in sleep mode
- Micro SIM Card
- Searches for network and login automatically
- Can connect any global GSM network with 2G sim
- AT command interface with auto baud detection
- Lead-out buzzer and vibration motor control port
- Scan and receive FM radio broadcast, send and receive SMS and call
Soil Moisture Sensor Module Arduino Compatible
- Working voltage: 5V
- Working Current: <20ma
- Interface: Analog
- Output voltage signal: 0~4.2V
- Depth of detection: 37mm
- Working Temperature: 10℃~30℃
- Size: 63×20×8mm
- Arduino compatible interface
- Low power consumption
- High sensitivity
UBLOX NEO-6M GPS module for DIY Project
- 5Hz position update rate
- Configurable from 4800 Baud to 115200 Baud rates (default 9600)
- EEPROM to save configuration settings
- Rechargeable battery for Backup
- Cold start time : 38s
- Hot start time : 1s
- Indoor GPS : -162 dBm tracking sensitivity
- Operating temperature range : 40°C - 85°C
- Support SBAS (WAAS, EGNOS, MSAS, GAGAN)
- Separated GPS antenna
- Supply voltage : 3.3V
Ultrasonic Sensor HC-SR04 Obstacle Detection
- Operating voltage: +5V
- Theoretical Measuring Distance: 2cm to 450cm
- Practical Measuring Distance: 2cm to 80cm
- Accuracy: 3mm
- Measuring angle covered: <15°
- Operating Current: <15mA
- Operating Frequency: 40Hz
Ultrasonic Sensor Holder for Ultrasonic Sensor HC-SR04
- Acrylic Body.
- Easy to install.
- Attractive blue color.
Vibration sensor module SW-420 for Arduino
- Using SW-420 normally closed type vibration sensor
- Comparator output, clean signal, good waveform, strong driving ability, >15mA
- Operating voltage 3.3V ~ 5V
- Output format: digital switching output (0 and 1)
- Using a wide voltage LM393 comparator
- With bolt holes for easy installation
Waterproof Ultrasonic Sensor Module JSN SR-04T
- Operating voltage: DC 5V
- Quiescent current: 5mA
- Total current draw: 30mA
- Frequency: 40khz
- Range: 25cm to 450cm
- Beam Angle: less than 50 degrees
- Working temperature: -10 ~ 70 Celsius
- Storage temperature: -20 ~ 80 Celsius
- Small size, easy to use
- Low voltage, low power consumption
- Strong anti-jamming
- Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions
