16 Channel PCA9685 12-bit PWM Servo Shield Motor Driver I2C
- 6 address select pins so you can wire up to 62 of these on a single i2c bus, a total of 992 outputs - that's a lot of servos or LEDs
- Adjustable frequency PWM up to about 1.6 KHz
- 12-bit resolution for each output - for servos, that means about 4us resolution at 60Hz update rate
- Configurable push-pull or open-drain output
- Output enable pin to quickly disable all the outputs
2 Axis Servo Pan Tilt Platform for Camera/Sensor
- PV Nylon Head Two Axial plastic
- Two axial platform
- Anti-vibration
- lightweight
- Good design and shape
- Sophisticated products
- Provision to add standard servo motors (sold separately)
- Pan and tilt using simple PPM interface using RC servos with position control.
- 180 Degree of freedom on both axis.
- Supported Motors: SG90, Mg90s
4.8-6V Servo Motor Tester with Indicator Light
- Supply voltage: 4.8V-6.0V
- Output Signal: 1.5ms±0.5ms
- Three mode selection [Manual, Neutral and Auto]
- Enclosure Box
- Mode selection LED Indicator
- Adjustable Knob for manual speed control
- Operating Temperature Range: -40~+85°C
MG90s Metal Gear Micro Servo Motor
- Operating Voltage: 4.8V to 6V (Typically 5V)
- Stall Torque: 1.8 kg/cm (4.8V)
- Max Stall Torque: 2.2 kg/cm (6V)
- Operating speed is 0.1s/60° (4.8V)
- Gear Type: Metal
- Rotation : 0°-180°
- Weight of motor : 13.4gm
- Package includes gear horns and screws
MG995 Servo Motor Tower Pro, 180 Degree Rotation
- Operating voltage range: 4.8 V to 7.2 V
- Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6v)
- Operating speed: 0.2 s/60º (4.8 V), 0.16 s/60º (6 V)
- Rotational degree: 180º
- Dead band width: 5 μs
- Operating temperature range: 0ºC to +55ºC
- Current draw at idle: 10mA
- No load operating current draw: 170mA
- Current at maximum load: 1200mA
MG996R Servo Motor Tower Pro Digital High Torque
- Operating Voltage is +5V typically
- Current: 2.5A (6V)
- Stall Torque: 9.4 kg/cm (at 4.8V)
- Maximum Stall Torque: 11 kg/cm (6V)
- Operating speed is 0.17 s/60°
- Gear Type: Metal
- Rotation : 0°-180°
- Weight of motor : 55gm
SG90 Tower Pro Micro Servo Motor 9gm
- Operating Voltage: 3V to 7.2V
- Stall torque @4.8V: 1.2 kg-cm
- Stall torque @6.6V: 1.6 kg-cm
- Gear Type Plastic
- Weight of Motor 9gms