Nepal's Most Trusted Robotics Component Supplier.

Showing all 10 results

Sort by
Show

10 Inch Propeller Pair CW/CCW for Quadcopter/RC Plane DIY

  • Length: 10″.
  • Pitch: 4.5″.
  • Weight: 22 gm.
  • Shaft Diameter: 9 mm.
  • Total Length: 10 inch / 250 mm.
  • Material: ABS
  • One clockwise and one anti-clockwise propeller

30A Brushed ESC with Brake Electronic Speed Controller

  • Support forward, backward, with the brake switch.
  • Be suitable for 130/180/260/280/380 brush motors, 1/16 1/18 1/24 RC car/ boat/ tank.
  • Replacement for HSP Redcat Traxxas Tamiya HPI rc4wd axial RC cars.
  • Voltage support: 4~8V.
  • Forward 30A
  • Instantaneous peak value 40A
  • Backward 20A
  • UBEC output: voltage 5.7V, current 1A.

5 Inch Propeller Pair CW/CCW for Quadcopter/RC Plane DIY

  • Length: 5″.
  • Pitch: 3″.
  • Weight: 15 gm.
  • Shaft Diameter: 9 mm.
  • Material: ABS
  • One clockwise and one anti-clockwise propeller

8 Inch Propeller Pair CW/CCW for Quadcopter/RC Plane DIY

  • Length: 8″.
  • Pitch: 4.5″.
  • Weight: 20 gm.
  • Shaft Diameter: 9 mm.
  • Material: ABS
  • One clockwise and one anti-clockwise propeller

BO Wheel 65mm Diameter 26mm Width Yellow

  • Shaft Diameter (mm) : 5.4mm-(round side) and 3.5mm-(flat side)
  • Wheel Diameter(mm) : 65
  • Wheel Width(mm) : 26
  • Loading Capacity (Kg) : 2

Double Metal Shaft BO Motor for RC Car

  • Operating Voltage (VDC):3 ~ 6
  • No Load Current (mA):40-180mA.
  • Type: Brushed
  • Shaft  :
    • Type: Dual  D
    • Length (mm):8.7 & 9.3
    • Diameter (mm):5.5
  • Gear:
    • Material: Metal
    • Ratio:1:90
  • Rated Speed After Reduction (RPM):110
  • Rated Torque (Kg-Cm):1

Double Shaft BO Motor for RC Car

  • Working voltage : 3V to 9V
  • 30gm weight
  • Ability to operate with minimum or no lubrication, due to inherent lubricity.
  • 1.9Kgf.cm torque
  • No-load current = 60mA, Stall current = 700mA

Emax BLHeli 30A ESC with Oneshot Drone/Quadcopter/RC Plane

  • Model: Emax BLHeli Series Oneshot
  • Burst Current: 40A (up to 10Sec)
  • Input Voltage(V): up to 16V
  • Constant Current: 30A
  • BEC: 5V /2A
  • Suitable Batteries: 2 ~ 4S

HC-05 Bluetooth Module for RC Car Arduino

  • Profiles: Bluetooth serial port Profile
  • Bluetooth protocol: Bluetooth Specification v2.0+EDR
  • Frequency: 2.4GHz ISM band
  • Modulation: GFSK(Gaussian Frequency Shift Keying)
  • Emission power: ≤4dBm, Class 2
  • Sensitivity: ≤-84dBm at 0.1% BER
  • Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
  • Security: Authentication and encryption
  • Power supply: +3.3VDC 50mA
  • Working temperature: -20 ~ +75 Centigrade

HC-06 Bluetooth Module for RC Car Arduino

  • Bluetooth Protocol: Bluetooth 2.0+EDR (Enhanced Data Rate)
  • 2.4GHz Communication Frequency
  • Precision: ≤-80 dBm
  • Output Power: ≤+4 dBm
  • Asynchronous Speed: 2.1 MBps/160 KBps
  • Synchronous Speed: 1 MBps/1 MBps
  • Security: Identity Validation and Encryption
  • Operating Voltage: 3.6-5V(3.6V Recommended)
  • Current: 50 mA
  • Dimensions: 43x16x7mm
Back to Top
Product has been added to your cart