30A Brushed ESC with Brake Electronic Speed Controller

Support forward, backward, with the brake switch.
Be suitable for 130/180/260/280/380 brush motors, 1/16 1/18 1/24 RC car/ boat/ tank.
Replacement for HSP Redcat Traxxas Tamiya HPI rc4wd axial RC cars.
Voltage support: 4~8V.
Forward 30A
Instantaneous peak value 40A
Backward 20A
UBEC output: voltage 5.7V, current 1A.

Product details

This ESC with the brake switch, support forward, backward. It is suitable for 130/180/260/280/380 brush motors, 1/16 1/18 1/24 RC car/boat/ tank.

Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
Brake Settings: The brake function can be enabled or disabled by switch.
Battery Type: The battery type can be chosen by a jumper.2.4 Low Voltage Protection
Threshold: For lithium batteries, the threshold for each cell is 3.0V. When the battery’s voltage is less then the threshold, the ESC will gradually reduce the output power to prevent the battery from over discharging.
Over-heat protection: When the temperature of the ESC is over 110 Celsius degree, the ESC will gradually reduce the output power.
Throttle signal loss protection: The ESC will gradually reduce the output power if the throttle signal is lost for 1 second, further loss for 2 seconds will cause its output to be completely cut-off.